
Add to Cart
IP67 outdoor lighting Aluminum SMD 100W Street Light Outdoor led street light housing
Product instructions:
● The LED street light input is a 3-core sheathed wire, in which the brown wire is connected to the live wire, the blue wire is connected to the neutral wire, and the yellow-green flower wire is grounded.
● Fix the LED street light on the installation platform, tighten the hex screw, and pay attention to keep the LED street lamp balanced during the installation process.
● Apply the rated voltage to the LED street lamp to work normally. During the working process, ensure that the voltage is within the rated range. If the rated voltage is exceeded, it will cause irreparable damage.
● Please cut off the power before installation and ensure that the installation can withstand the weight of the lamp.
● In order to prevent the lamp from falling off, be sure to confirm the installation. .
● Do not cover any material on the lamp.
● For safety, please connect the ground wire securely.
● Failures caused by decomposition, modification, or improper construction of this product are not covered by this warranty.
Product specification parameter table:
Parameter name | Minimum | rating | maximum value |
Operating Voltage | 90V AC | 220V AC | 265V AC |
working frequency | 43Hz | 50Hz | 63Hz |
Power factor | 0.92 | 0.98 | 1.0 |
Power Efficiency | 88% | 90% | 92% |
Constant current accuracy | 2% | 3% | 5% |
Lamp efficiency | ≥88% | ≥90% | ≥92% |
Color rendering index | ≥80 | ≥85 | ≥90 |
Power configuration | Meanwell HLG/ELG | Infert | |
Chip brand | Osram | CREE | |
Total power |
±5% | ||
Overall lighting effect | 145lm/W±5% | ||
Power source | -5% | ||
Beam angle | T2 T3 T4 T5 | ||
Color tolerance | ≦5 SDCM | ||
surface temperature | <65℃ | ||
Operating temperature | ‐25℃—45℃ | ||
Mean time between failures | 50000 hrs | ||
Protection level | IP66 | ||
Recommended pole height | 10m-15m |
Welcome to inquiries and more order. Any questions, Plz feel free to contact me.